Box lettering made of acrylic glass – the acrylic face is glued flush to pre-curved acrylic glass side
walls. The back is made of 10 mm PVC Forex or aluminum sheet. Indoor backlit: LED modules that
illuminate the front and sides.The thickness of side and face are 3 mm.
Back and sides are made of aluminum and are painted with polyurethane varnish in a semi-matte
or glossy finish. The face is made of 3 or 4 mm opal or colored acryl glas. The front is screwed to
the side using attachments and screws.
Profile 6 is suitable for small to medium-sized signs for indoor and well-protected outdoor
locations. Popular for the clean details of the front connection.
The letter body is made of stainless steel with a soldered side. The inside of the body is painted
matte white and equipped with LED modules. The light is evenly diffused by reflection from the
body, preventing any light spots from appearing on the facade. Wall mounting using the included
spacer tubes.
1W,0,5W,15W,0,36W We use KAISEN LEDs for our products. The diodes and transformer are waterproof, dustproof, and have a long service life. Technical specifications can be found in the attached files.
Box lettering made of aluminum with a welded side, painted with semi-matte or glossy polyurethane varnish.
Mounting on the wall using spacer tubes, which are included in the delivery. Attaching to the structure
using hooks on the back of the letters.
The illumination is directed forward through
translucent acrylic glass (3 or 4 mm thick), which is held by a surrounding metal facet on a metal
body. The inside of the body is painted matte white. The side and metal facet are painted
externally with polyurethane varnish in a semi-matte or glossy finish. The range of solid-colored
acrylic glass is complemented by a variety of translucent self-adhesive foil shades and digital four-
color printing on weather- and UV-resistant foils.
This lettering is capable of withstanding even the most extreme outdoor conditions in all regions for
long-term use.
This profile is also called shadow lettering because it reflects the light backward onto the façade,
which is as bright and matte as possible. The aluminum body has a welded front and side. It can be
finished with semi-matte or glossy polyurethane varnish. The inside of the lettering is painted
matte white and equipped with LED modules. The light is evenly diffused by reflection from the
body, preventing any light spots from appearing on the façade. Wall mounting is possible using the
included spacer tubes.
This design is essentially identical to Profile 4. However, the acrylic face is held in place by a plastic
lining (trim cap). The body is made of aluminum sheet and the side walls are spot-welded to the
back side. The inside is white painted . The outer sides of body are painted with polyurethane
varnish in a semi-matte or glossy finish. The front is made of 3 or 4 mm acrylic glass (opal or
colored), optionally covered with a translucent colored film.
Please note, however, that this design is only suitable for letters up to 70 cm high.
In our powder coating facility, we paint with colors according to the RAL color palette. We can
order the color according to your wishes. Please note that the colors shown in the image may differ
slightly from the actual product.
